Ghost Ship in a Bottle

I've completed two ships since my last post so I thought it's about time to post something about one of them.  This one comes by popular demand.  The Ghost Ship in a Bottle.

 I came up the idea while on the yahoo forum.  Some one mentioned lighting a ship up with UV lights.  I decided to explore the idea.  I talked to a friend who had some UV LED's and we found that the purple tinted UV lights will not show through a dark root beer bottle but the light bouncing off of a white surface will.  So then I took it a step farther and used glow in the dark paint which lights up quiet nicely under the UV light.

I didn't get any pictures of the ship before I put her in the bottle.   The build went fast since I wasn't worried about to many details.  So assuming you've already built your ship paint it with glow in the dark paint.  I just got some acrylic paint from Walmart for two or three bucks and it works great.  I painted almost everything. The sails, the lines, the hull, the masts.  The only thing I didn't paint were the cannons and the anchor on the front.  The idea behind this was to let the light around it glow and the cannons and anchor would appear as just a silhouette creating a more dramatic look.  As you can see the anchor worked fine but with out a second LED behind the ship the cannons are out of sight.

Another part of building this ship was the holes in the sails.  I used a canvas type cloth for the sails. Pinching small sections I used scissors to cut holes and give it the well weathered ragged look.  I then just let it fray as canvass does and painted it all in glow in the dark paint.  

Now the fun part.  How to make it work.  First get yourself some UV LED's.  I just went to Radio Shack.  They were helpful in letting me know what I needed.  If you want them cheap go on eBay.  You can buy 300 for less then $5.  I don't know if some are better then others I just made sure they were Ultra Violet LED's.

Along with your LED's you will need a power source.  You will have to check the specifications of your LED's to see whats right for what you have.

You will also need a resistor.  Chances are your LED will be like mine and it won't light until it hits 3.7 volts.  Now try to find a 3.7 volt battery but don't go over the highest specification which is under 6.  Doing so will burn out your LED.  Since there was no such battery so I got a six volt battery and used a resistor to bring it down to the required maximum voltage.  Here's a tool to help you do that. http://ledcalculator.net/

I then searched YouTube to help me figure out how to put everything together.  Here's the video I used.  It's a bit long so skip to the parts you need.  The important thing is he helps you understand how to identify the negative and positive parts of an LED and where the resistors should go.  Best place to start is the two minute 21 second mark.

Now that you've got the wiring figure out it's time to build it into the bottle.  I decided to use the cork to hold my battery and my LED in place.

Here you can see the wire that connects to positive side of that battery and completes the circuit.  It's a very crude method but it works.  Some one with more skill and means can definitely make an improvement.

 A few more shots to give you an idea of how I put it together.

My original plan was to put an LED behind the ship as well so it would be lit from two sides showing front and back.  I got it for about two seconds before I lost the connection.  I'll keep trying.  Some one suggested drilling holes in the bottle with a ceramic drill bit.  I may try that.  With or with out the other LED I think she looks great.  The light you see around the ship is white caps I painted with the glow in the dark paint.  I tried to make the sea stand out a little.

   
She definitely stands out in the collection.

  My wife is currently writing a short story behind the Ghost Ship in the Bottle.  Once it's finished she may post it to her writing blog.  To read her blog please go here. The Ghost Ship in a Bottle

If you do plan on building a ghost ship in a bottle I would love to know how it turns out.  Email me a picture at siemensbottleingco@gmail.com.  Thank you for reading!  

Ready The Long Boats!

I stumbled across a new technique while digging through the photo's on the Yahoo forum.  I won't mention which one since SIB builders on the forum are a humble folk and don't usually take a liking to drawing attention to them selves and this blog is very public.  Did I just say take a liking?  Wow too much study for my up coming talk like a pirate day post.  Any way if you want to find the inspiration for this post dig into the yahoo forum photos and you'll find it.  As well as a lot of other inspiration, the yahoo forum files and photos have a lot of good stuff.  

So this post is all about turning a match stick...

...into a long boat small enough to fit on a dime.

Long boat's, dingy's, life boats what ever you want to call them they are a fun accessory to ships in bottles.  Trouble is making one small enough to look the part.  Here is a fairly quick and easy method.  I say fairly because lets face it your dealing with super small parts and it can get tricky.

First take your match stick and mark out the size you want your boat.

Then sand the end.  It is important to leave the boat on the match stick at this point since it gives you a place to hold on while you cut and sand.

Next use a dremel to cut the spaces between the seats.  I usually use three cuts but do what you think looks right.  

The end result should be something like this.

Once that's done sand down the middle seats so they're just a little bit lower.  This makes it look like they are seats in the bottom of the boat.  

Now get out a separate match stick.  This one will be used to create the side of the boat.  Use a razor blade to cut a paper thin strip of wood.  This may take a few tries.  

Cut out two small strips.  

Cover the whole side of the ship with glue and glue the strips onto the sides.  This is important since you'll be sanding on the boat and if they aren't glued tight they can come off.  Also glue the strip so it sicks up a little above the top of the match stick.  You want it to look like you can actually sit in it.  

Now sand the boat into shape.  This is one of the hardest parts since it is so small so be patient with it.  

It is finally time to cut the boat off the match stick and do the final touch up sanding.  You may need to add another strip of wood to the back as well to match the height of the sides.  

Once the boat is off the match stick it will be much harder to handle so try to do most of the sanding while it's on.  As far as the back of the boat goes I like to taper up the bottom and sides just a bit to give it a good shape.  Pretty much just make it look like a boat.  

Congratulations your done!  From here it can be painted stained or just glued onto the ship.  

Thank you for reading and have fun building!